3/8-16 x 4 1/2 NC GR5 Black Hex Head Bolt (VR225/BT100) - 073-505
INF103093N
Prix régulier
$1.56
Ready to ship (45)
- Papco® Grade 5 assembly screws, identified by the three radial bar heads marking, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- Double heat treatment
- Hardened and tempered medium carbon steel: c: 0.28 to 0.55, p: 0.025 maximum, s: 0.025 maximum
- For the studs only, the sulfur content can be a maximum of 0.13%
- Sufficient hardenability is required to ensure a microstructure consisting of approximately 90% martensite in the web of the threaded sections of the fasteners after hardening and quenching, and before tempering.
- Papco® Grade 5 assembly screws, identified by the three radial bar heads marking, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- Double heat treatment
- Hardened and tempered medium carbon steel: c: 0.28 to 0.55, p: 0.025 maximum, s: 0.025 maximum
- For the studs only, the sulfur content can be a maximum of 0.13%
- Sufficient hardenability is required to ensure a microstructure consisting of approximately 90% martensite in the web of the threaded sections of the fasteners after hardening and quenching, and before tempering.
INF103093N
Prix régulier
$1.56
Ready to ship (45)
- Papco® Grade 5 assembly screws, identified by the three radial bar heads marking, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- Double heat treatment
- Hardened and tempered medium carbon steel: c: 0.28 to 0.55, p: 0.025 maximum, s: 0.025 maximum
- For the studs only, the sulfur content can be a maximum of 0.13%
- Sufficient hardenability is required to ensure a microstructure consisting of approximately 90% martensite in the web of the threaded sections of the fasteners after hardening and quenching, and before tempering.
- Papco® Grade 5 assembly screws, identified by the three radial bar heads marking, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- Double heat treatment
- Hardened and tempered medium carbon steel: c: 0.28 to 0.55, p: 0.025 maximum, s: 0.025 maximum
- For the studs only, the sulfur content can be a maximum of 0.13%
- Sufficient hardenability is required to ensure a microstructure consisting of approximately 90% martensite in the web of the threaded sections of the fasteners after hardening and quenching, and before tempering.