HARDNESS BLOCK 3000KG +-PT05257 - PT05257
STT67956
Prix régulier
$473.35
Preorder today
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- Capacity of 3000 kg
- They are available in steel, brass and aluminum
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- Capacity of 3000 kg
- They are available in steel, brass and aluminum
STT67956
Prix régulier
$473.35
Preorder today
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- Capacity of 3000 kg
- They are available in steel, brass and aluminum
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- Capacity of 3000 kg
- They are available in steel, brass and aluminum