HARDNESS BLOCK RA70-PT05091 - PT05091
STT67898
Prix régulier
$264.34
Preorder today
- Hydraulic Portes® flange adapter rated at 6000 lb/in-ft for replacing bent tube assemblies with a standard coupling
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- They are available in steel, brass and aluminum
- Hydraulic Portes® flange adapter rated at 6000 lb/in-ft for replacing bent tube assemblies with a standard coupling
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- They are available in steel, brass and aluminum
STT67898
Prix régulier
$264.34
Preorder today
- Hydraulic Portes® flange adapter rated at 6000 lb/in-ft for replacing bent tube assemblies with a standard coupling
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- They are available in steel, brass and aluminum
- Hydraulic Portes® flange adapter rated at 6000 lb/in-ft for replacing bent tube assemblies with a standard coupling
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- They are available in steel, brass and aluminum