HARDNESS BLOCK RC40-PT05055 - PT05055
STT67884
Prix régulier
$266.80
Preorder today
- The top of the beam is flattened so that when the trams are tightened into position, they do not rotate due to pressure on the points
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- They are available in steel, brass and aluminum
- The top of the beam is flattened so that when the trams are tightened into position, they do not rotate due to pressure on the points
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- They are available in steel, brass and aluminum
STT67884
Prix régulier
$266.80
Preorder today
- The top of the beam is flattened so that when the trams are tightened into position, they do not rotate due to pressure on the points
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- They are available in steel, brass and aluminum
- The top of the beam is flattened so that when the trams are tightened into position, they do not rotate due to pressure on the points
- The actual readings are given, along with the averages of the minimum reading, the maximum reading, and a repeatability figure.
- Hardness test blocks are designed for use on one side only.
- The indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Compatible with the 3814, 3816 and 3817 testers
- They are available in steel, brass and aluminum