Ball attachment for micrometer .200-247C - 247C
STT51176
Prix régulier
$30.88
Preorder today
- It is easily applied by snapping onto the end of the anvil or spindle, allowing two accessories to be used together.
- The balls are hardened and move freely within the retaining device, ensuring positive contact with the anvil and the spindle.
- The diameters, 0.200 or 5 mm, of each ball used must be subtracted from the micrometer reading
- It is easily applied by snapping onto the end of the anvil or spindle, allowing two accessories to be used together.
- The balls are hardened and move freely within the retaining device, ensuring positive contact with the anvil and the spindle.
- The diameters, 0.200 or 5 mm, of each ball used must be subtracted from the micrometer reading
STT51176
Prix régulier
$30.88
Preorder today
- It is easily applied by snapping onto the end of the anvil or spindle, allowing two accessories to be used together.
- The balls are hardened and move freely within the retaining device, ensuring positive contact with the anvil and the spindle.
- The diameters, 0.200 or 5 mm, of each ball used must be subtracted from the micrometer reading
- It is easily applied by snapping onto the end of the anvil or spindle, allowing two accessories to be used together.
- The balls are hardened and move freely within the retaining device, ensuring positive contact with the anvil and the spindle.
- The diameters, 0.200 or 5 mm, of each ball used must be subtracted from the micrometer reading