1/4-20 x 1 3/4 NC GR5 BLACK HEX HEAD BOLT VR1400 - BT100 - 073-315
INF103023N
Prix régulier
$0.43
Preorder today
- The 12-point end allows for fine indexing, helping to improve speed and access; it fits 4, 6, and 12-point bindings.
- Double heat treatment
- Hardened and tempered medium carbon steel: c: 0.28 to 0.55, p: 0.025 maximum, s: 0.025 maximum
- For dowels only, the sulfur content may be a maximum of 0.13%
- Sufficient hardenability is required to ensure a microstructure composed of approximately 90% martensite in the core of the threaded sections of the fasteners after hardening and quenching, and before tempering.
- The 12-point end allows for fine indexing, helping to improve speed and access; it fits 4, 6, and 12-point bindings.
- Double heat treatment
- Hardened and tempered medium carbon steel: c: 0.28 to 0.55, p: 0.025 maximum, s: 0.025 maximum
- For dowels only, the sulfur content may be a maximum of 0.13%
- Sufficient hardenability is required to ensure a microstructure composed of approximately 90% martensite in the core of the threaded sections of the fasteners after hardening and quenching, and before tempering.
INF103023N
Prix régulier
$0.43
Preorder today
- The 12-point end allows for fine indexing, helping to improve speed and access; it fits 4, 6, and 12-point bindings.
- Double heat treatment
- Hardened and tempered medium carbon steel: c: 0.28 to 0.55, p: 0.025 maximum, s: 0.025 maximum
- For dowels only, the sulfur content may be a maximum of 0.13%
- Sufficient hardenability is required to ensure a microstructure composed of approximately 90% martensite in the core of the threaded sections of the fasteners after hardening and quenching, and before tempering.
- The 12-point end allows for fine indexing, helping to improve speed and access; it fits 4, 6, and 12-point bindings.
- Double heat treatment
- Hardened and tempered medium carbon steel: c: 0.28 to 0.55, p: 0.025 maximum, s: 0.025 maximum
- For dowels only, the sulfur content may be a maximum of 0.13%
- Sufficient hardenability is required to ensure a microstructure composed of approximately 90% martensite in the core of the threaded sections of the fasteners after hardening and quenching, and before tempering.