CIRCUMFERENCE INDICATOR DIAL 600MM-1100M-600 - 1100M-600
STT65025
Prix régulier
$6,207.15
Preorder today
- The die is held in place by two opposing conical screws in the stock which are located in two dashes in the die
- There are two instrumentation feet at the reference end and one foot at the sensitive end of the instrumentation to set the instrumentation on the workpiece and align the contacts
- The depth of the instrumentation is defined by adjusting the instrument's feet upwards or downwards.
- A reverse lever-operated mechanism loads the instrumentation for internal or external diameter measurements
- The instrumentation contacts are easily changed to iD or oD gadding by turning them end to end.
- Unless otherwise specified, the dial indicator shipped with the instrumentation reads in 0.005 in. increments with a total range of +/- 0.03 in.
- The dial has a double row of graduations reading in opposite directions - minus in red and plus in black
- The die is held in place by two opposing conical screws in the stock which are located in two dashes in the die
- There are two instrumentation feet at the reference end and one foot at the sensitive end of the instrumentation to set the instrumentation on the workpiece and align the contacts
- The depth of the instrumentation is defined by adjusting the instrument's feet upwards or downwards.
- A reverse lever-operated mechanism loads the instrumentation for internal or external diameter measurements
- The instrumentation contacts are easily changed to iD or oD gadding by turning them end to end.
- Unless otherwise specified, the dial indicator shipped with the instrumentation reads in 0.005 in. increments with a total range of +/- 0.03 in.
- The dial has a double row of graduations reading in opposite directions - minus in red and plus in black
STT65025
Prix régulier
$6,207.15
Preorder today
- The die is held in place by two opposing conical screws in the stock which are located in two dashes in the die
- There are two instrumentation feet at the reference end and one foot at the sensitive end of the instrumentation to set the instrumentation on the workpiece and align the contacts
- The depth of the instrumentation is defined by adjusting the instrument's feet upwards or downwards.
- A reverse lever-operated mechanism loads the instrumentation for internal or external diameter measurements
- The instrumentation contacts are easily changed to iD or oD gadding by turning them end to end.
- Unless otherwise specified, the dial indicator shipped with the instrumentation reads in 0.005 in. increments with a total range of +/- 0.03 in.
- The dial has a double row of graduations reading in opposite directions - minus in red and plus in black
- The die is held in place by two opposing conical screws in the stock which are located in two dashes in the die
- There are two instrumentation feet at the reference end and one foot at the sensitive end of the instrumentation to set the instrumentation on the workpiece and align the contacts
- The depth of the instrumentation is defined by adjusting the instrument's feet upwards or downwards.
- A reverse lever-operated mechanism loads the instrumentation for internal or external diameter measurements
- The instrumentation contacts are easily changed to iD or oD gadding by turning them end to end.
- Unless otherwise specified, the dial indicator shipped with the instrumentation reads in 0.005 in. increments with a total range of +/- 0.03 in.
- The dial has a double row of graduations reading in opposite directions - minus in red and plus in black