DIAMETER INDICATOR DIAL 300 TO 450MM-1100M-450-2 - 1100M-450-2
STT69029
Prix régulier
$6,455.97
Preorder today
- The Stanley® shank saw has tungsten carbide particles that allow the blade to cut on both the front and back kerfs.
- There are two instrumentation feet at the reference end and one foot at the sensitive end of the instrumentation to set the instrumentation on the workpiece and align the contacts
- The depth of the instrumentation is defined by adjusting the instrument's feet upwards or downwards.
- A reverse lever-operated mechanism loads the instrumentation for internal or external diameter measurements
- The instrumentation contacts are easily changed to iD or oD gadding by turning them end to end.
- Unless otherwise specified, the dial indicator shipped with the instrumentation reads in 0.005 in. increments with a total range of +/- 0.03 in.
- The dial has a double row of graduations reading in opposite directions - minus in red and plus in black
- The Stanley® shank saw has tungsten carbide particles that allow the blade to cut on both the front and back kerfs.
- There are two instrumentation feet at the reference end and one foot at the sensitive end of the instrumentation to set the instrumentation on the workpiece and align the contacts
- The depth of the instrumentation is defined by adjusting the instrument's feet upwards or downwards.
- A reverse lever-operated mechanism loads the instrumentation for internal or external diameter measurements
- The instrumentation contacts are easily changed to iD or oD gadding by turning them end to end.
- Unless otherwise specified, the dial indicator shipped with the instrumentation reads in 0.005 in. increments with a total range of +/- 0.03 in.
- The dial has a double row of graduations reading in opposite directions - minus in red and plus in black
STT69029
Prix régulier
$6,455.97
Preorder today
- The Stanley® shank saw has tungsten carbide particles that allow the blade to cut on both the front and back kerfs.
- There are two instrumentation feet at the reference end and one foot at the sensitive end of the instrumentation to set the instrumentation on the workpiece and align the contacts
- The depth of the instrumentation is defined by adjusting the instrument's feet upwards or downwards.
- A reverse lever-operated mechanism loads the instrumentation for internal or external diameter measurements
- The instrumentation contacts are easily changed to iD or oD gadding by turning them end to end.
- Unless otherwise specified, the dial indicator shipped with the instrumentation reads in 0.005 in. increments with a total range of +/- 0.03 in.
- The dial has a double row of graduations reading in opposite directions - minus in red and plus in black
- The Stanley® shank saw has tungsten carbide particles that allow the blade to cut on both the front and back kerfs.
- There are two instrumentation feet at the reference end and one foot at the sensitive end of the instrumentation to set the instrumentation on the workpiece and align the contacts
- The depth of the instrumentation is defined by adjusting the instrument's feet upwards or downwards.
- A reverse lever-operated mechanism loads the instrumentation for internal or external diameter measurements
- The instrumentation contacts are easily changed to iD or oD gadding by turning them end to end.
- Unless otherwise specified, the dial indicator shipped with the instrumentation reads in 0.005 in. increments with a total range of +/- 0.03 in.
- The dial has a double row of graduations reading in opposite directions - minus in red and plus in black