24mm Bolt Cutter, Center Cut, General Purpose - 0190FC
CCHKP0190FC
Prix régulier
$325.42
Preorder today
- The ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15-20% more torque while reducing fastener rounding, improving the reversal of worn fasteners
- Cuts soft and medium materials up to 7/16" thick and hard materials up to 5/16" thick
- Cuts materials up to Brinell 455 or Rockwell C48 hardness
- The locking plate prevents the jaws from loosening.
- The toggle joints rotate from 50 lbs of hand pressure to 4000 lbs of cutting pressure
- Adjusting the screw type realigns the edges
- Strong and lightweight fiberglass handles
- Never use hK Portier® cutters on live circuits, wires or cables
- The ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15-20% more torque while reducing fastener rounding, improving the reversal of worn fasteners
- Cuts soft and medium materials up to 7/16" thick and hard materials up to 5/16" thick
- Cuts materials up to Brinell 455 or Rockwell C48 hardness
- The locking plate prevents the jaws from loosening.
- The toggle joints rotate from 50 lbs of hand pressure to 4000 lbs of cutting pressure
- Adjusting the screw type realigns the edges
- Strong and lightweight fiberglass handles
- Never use hK Portier® cutters on live circuits, wires or cables
CCHKP0190FC
Prix régulier
$325.42
Preorder today
- The ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15-20% more torque while reducing fastener rounding, improving the reversal of worn fasteners
- Cuts soft and medium materials up to 7/16" thick and hard materials up to 5/16" thick
- Cuts materials up to Brinell 455 or Rockwell C48 hardness
- The locking plate prevents the jaws from loosening.
- The toggle joints rotate from 50 lbs of hand pressure to 4000 lbs of cutting pressure
- Adjusting the screw type realigns the edges
- Strong and lightweight fiberglass handles
- Never use hK Portier® cutters on live circuits, wires or cables
- The ends incorporate a radius corner design that engages the flats of the fastener, not the corners, providing up to 15-20% more torque while reducing fastener rounding, improving the reversal of worn fasteners
- Cuts soft and medium materials up to 7/16" thick and hard materials up to 5/16" thick
- Cuts materials up to Brinell 455 or Rockwell C48 hardness
- The locking plate prevents the jaws from loosening.
- The toggle joints rotate from 50 lbs of hand pressure to 4000 lbs of cutting pressure
- Adjusting the screw type realigns the edges
- Strong and lightweight fiberglass handles
- Never use hK Portier® cutters on live circuits, wires or cables