ENS. HARDNESS BLOCK (3 PIECES)-PT05272 - PT05272
STT67969
Prix régulier
$2,864.68
Preorder today
- Papco® Grade 8 cap screws, identified by the six radial bar marking on the head, are made of medium carbon alloy steel, hardened and tempered for stronger, safer, and more reliable mechanical seals.
- They are supplied with calibrated test blocks and the serialized indenter that was used to inspect each of the blocks in the set.
- When an anomaly is detected in a tester, these kits allow you to determine the direction to take to resolve the problem.
- The block is serialized, with a certificate detailing the environmental conditions used to test the block.
- The blocks are made from square steel or brass plates, as opposed to the more common stock of round bars
- Using a plate provides a more precise and homogeneous surface for inspection.
- Metallurgical tests have proven that during the production of round bars, the carbides suspended in the mixture migrate towards the center of the rod
- The blocks are designed for use on one side only, and the indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Papco® Grade 8 cap screws, identified by the six radial bar marking on the head, are made of medium carbon alloy steel, hardened and tempered for stronger, safer, and more reliable mechanical seals.
- They are supplied with calibrated test blocks and the serialized indenter that was used to inspect each of the blocks in the set.
- When an anomaly is detected in a tester, these kits allow you to determine the direction to take to resolve the problem.
- The block is serialized, with a certificate detailing the environmental conditions used to test the block.
- The blocks are made from square steel or brass plates, as opposed to the more common stock of round bars
- Using a plate provides a more precise and homogeneous surface for inspection.
- Metallurgical tests have proven that during the production of round bars, the carbides suspended in the mixture migrate towards the center of the rod
- The blocks are designed for use on one side only, and the indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
STT67969
Prix régulier
$2,864.68
Preorder today
- Papco® Grade 8 cap screws, identified by the six radial bar marking on the head, are made of medium carbon alloy steel, hardened and tempered for stronger, safer, and more reliable mechanical seals.
- They are supplied with calibrated test blocks and the serialized indenter that was used to inspect each of the blocks in the set.
- When an anomaly is detected in a tester, these kits allow you to determine the direction to take to resolve the problem.
- The block is serialized, with a certificate detailing the environmental conditions used to test the block.
- The blocks are made from square steel or brass plates, as opposed to the more common stock of round bars
- Using a plate provides a more precise and homogeneous surface for inspection.
- Metallurgical tests have proven that during the production of round bars, the carbides suspended in the mixture migrate towards the center of the rod
- The blocks are designed for use on one side only, and the indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in
- Papco® Grade 8 cap screws, identified by the six radial bar marking on the head, are made of medium carbon alloy steel, hardened and tempered for stronger, safer, and more reliable mechanical seals.
- They are supplied with calibrated test blocks and the serialized indenter that was used to inspect each of the blocks in the set.
- When an anomaly is detected in a tester, these kits allow you to determine the direction to take to resolve the problem.
- The block is serialized, with a certificate detailing the environmental conditions used to test the block.
- The blocks are made from square steel or brass plates, as opposed to the more common stock of round bars
- Using a plate provides a more precise and homogeneous surface for inspection.
- Metallurgical tests have proven that during the production of round bars, the carbides suspended in the mixture migrate towards the center of the rod
- The blocks are designed for use on one side only, and the indentations must be greater than 0.01 in from the centers of two indentations or no closer to the edge of the block than 0.04 in