ASSEMBLY OF THE INTERNAL MICROMETER .120 TO .250-S78XTBZ - S78XTBZ
STT68152
Prix régulier
$9,635.64
Preorder today
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- Tungsten carbide measuring faces on all heads at 3 points above 1/2 in (12.5 mm)
- The ratchet stop wrench ensures consistent measurements.
- Self-centering contacts for true readings
- Blind bore hole measuring capacity above 1/2 in (12.5 mm) in diameter
- Extensions available up to 6 inches (150 mm) for measuring deep holes
- 3 heads and 2 rings
- 2-point contact
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- Tungsten carbide measuring faces on all heads at 3 points above 1/2 in (12.5 mm)
- The ratchet stop wrench ensures consistent measurements.
- Self-centering contacts for true readings
- Blind bore hole measuring capacity above 1/2 in (12.5 mm) in diameter
- Extensions available up to 6 inches (150 mm) for measuring deep holes
- 3 heads and 2 rings
- 2-point contact
STT68152
Prix régulier
$9,635.64
Preorder today
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- Tungsten carbide measuring faces on all heads at 3 points above 1/2 in (12.5 mm)
- The ratchet stop wrench ensures consistent measurements.
- Self-centering contacts for true readings
- Blind bore hole measuring capacity above 1/2 in (12.5 mm) in diameter
- Extensions available up to 6 inches (150 mm) for measuring deep holes
- 3 heads and 2 rings
- 2-point contact
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- Tungsten carbide measuring faces on all heads at 3 points above 1/2 in (12.5 mm)
- The ratchet stop wrench ensures consistent measurements.
- Self-centering contacts for true readings
- Blind bore hole measuring capacity above 1/2 in (12.5 mm) in diameter
- Extensions available up to 6 inches (150 mm) for measuring deep holes
- 3 heads and 2 rings
- 2-point contact