4'' PRECISION VICE 581 - 581
STT64962
Prix régulier
$2,997.43
Preorder today
- Four pre-drilled and countersunk holes for 5/16" bolts in the base of the vise for bolting onto a sinusoidal plate or the bed of a machine tool
- A 1/4-20" tapped hole is provided on each side of the solid jaw to allow the use of a stop for repetitive operations.
- Flat, square terrain, parallel to each other within 0.0002 inches
- A T-handle wrench is provided for tightening the movable jaw.
- The jaw pressure on the workpiece is forward and downward for repeatable positioning and maximum holding power
- The movable jaw is slightly narrower than the base, allowing the vise to be used from the side.
- For attaching special jaw plates, two holes are drilled in the solid and movable jaws.
- Four pre-drilled and countersunk holes for 5/16" bolts in the base of the vise for bolting onto a sinusoidal plate or the bed of a machine tool
- A 1/4-20" tapped hole is provided on each side of the solid jaw to allow the use of a stop for repetitive operations.
- Flat, square terrain, parallel to each other within 0.0002 inches
- A T-handle wrench is provided for tightening the movable jaw.
- The jaw pressure on the workpiece is forward and downward for repeatable positioning and maximum holding power
- The movable jaw is slightly narrower than the base, allowing the vise to be used from the side.
- For attaching special jaw plates, two holes are drilled in the solid and movable jaws.
STT64962
Prix régulier
$2,997.43
Preorder today
- Four pre-drilled and countersunk holes for 5/16" bolts in the base of the vise for bolting onto a sinusoidal plate or the bed of a machine tool
- A 1/4-20" tapped hole is provided on each side of the solid jaw to allow the use of a stop for repetitive operations.
- Flat, square terrain, parallel to each other within 0.0002 inches
- A T-handle wrench is provided for tightening the movable jaw.
- The jaw pressure on the workpiece is forward and downward for repeatable positioning and maximum holding power
- The movable jaw is slightly narrower than the base, allowing the vise to be used from the side.
- For attaching special jaw plates, two holes are drilled in the solid and movable jaws.
- Four pre-drilled and countersunk holes for 5/16" bolts in the base of the vise for bolting onto a sinusoidal plate or the bed of a machine tool
- A 1/4-20" tapped hole is provided on each side of the solid jaw to allow the use of a stop for repetitive operations.
- Flat, square terrain, parallel to each other within 0.0002 inches
- A T-handle wrench is provided for tightening the movable jaw.
- The jaw pressure on the workpiece is forward and downward for repeatable positioning and maximum holding power
- The movable jaw is slightly narrower than the base, allowing the vise to be used from the side.
- For attaching special jaw plates, two holes are drilled in the solid and movable jaws.