DRILL 5/32 LONG CROSS POINT 135° COBALT - 44810
GRE44810
Prix régulier
$22.45
Back in soon
- Heavy-duty geometry for drilling in tough, high-strength, and work-hardening materials under extreme operating conditions
- Made from premium cobalt high-speed steel for increased red hardness
- At 135 degrees, the splitting point is self-centering for reduced thrust and easier penetration.
- The straw finish easily identifies the cobalt tooling.
- -0.0007 in drill bit diameter tolerance
- +/-0.125 in overall length tolerance
- +/-0.125 in. groove length tolerance
- +/-5 degrees tip angle tolerance
- Heavy-duty geometry for drilling in tough, high-strength, and work-hardening materials under extreme operating conditions
- Made from premium cobalt high-speed steel for increased red hardness
- At 135 degrees, the splitting point is self-centering for reduced thrust and easier penetration.
- The straw finish easily identifies the cobalt tooling.
- -0.0007 in drill bit diameter tolerance
- +/-0.125 in overall length tolerance
- +/-0.125 in. groove length tolerance
- +/-5 degrees tip angle tolerance
GRE44810
Prix régulier
$22.45
Back in soon
- Heavy-duty geometry for drilling in tough, high-strength, and work-hardening materials under extreme operating conditions
- Made from premium cobalt high-speed steel for increased red hardness
- At 135 degrees, the splitting point is self-centering for reduced thrust and easier penetration.
- The straw finish easily identifies the cobalt tooling.
- -0.0007 in drill bit diameter tolerance
- +/-0.125 in overall length tolerance
- +/-0.125 in. groove length tolerance
- +/-5 degrees tip angle tolerance
- Heavy-duty geometry for drilling in tough, high-strength, and work-hardening materials under extreme operating conditions
- Made from premium cobalt high-speed steel for increased red hardness
- At 135 degrees, the splitting point is self-centering for reduced thrust and easier penetration.
- The straw finish easily identifies the cobalt tooling.
- -0.0007 in drill bit diameter tolerance
- +/-0.125 in overall length tolerance
- +/-0.125 in. groove length tolerance
- +/-5 degrees tip angle tolerance