7.25mm Long 118° Black Oxide Drill Bit (A1107.25) - 5968231
DOR0011720
Prix régulier
$33.06
Preorder today
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- The oxide prevents chip formation, wire splintering, and welding to the workpiece
- It is commonly used on low-carbon metals, stainless steel, and ferrous metals.
- Helical flutes are constructed with a higher flute angle to remove chips more easily
- conical web configuration
- 21-34 degree ordinary helix
- Ideal for drilling a deep hole
- No coolant reservoir
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- The oxide prevents chip formation, wire splintering, and welding to the workpiece
- It is commonly used on low-carbon metals, stainless steel, and ferrous metals.
- Helical flutes are constructed with a higher flute angle to remove chips more easily
- conical web configuration
- 21-34 degree ordinary helix
- Ideal for drilling a deep hole
- No coolant reservoir
DOR0011720
Prix régulier
$33.06
Preorder today
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- The oxide prevents chip formation, wire splintering, and welding to the workpiece
- It is commonly used on low-carbon metals, stainless steel, and ferrous metals.
- Helical flutes are constructed with a higher flute angle to remove chips more easily
- conical web configuration
- 21-34 degree ordinary helix
- Ideal for drilling a deep hole
- No coolant reservoir
- Papco® grade 5 cap screws, identified by the three radial bar marking on the head, are made of medium carbon steel, hardened and tempered for higher tensile strength and holding power.
- The oxide prevents chip formation, wire splintering, and welding to the workpiece
- It is commonly used on low-carbon metals, stainless steel, and ferrous metals.
- Helical flutes are constructed with a higher flute angle to remove chips more easily
- conical web configuration
- 21-34 degree ordinary helix
- Ideal for drilling a deep hole
- No coolant reservoir