PNEUMATIC NIBBLER - 404153
JET404153
Prix régulier
$227.58
Preorder today
- For maximum performance, we recommend an air pressure of 90 psi
- Powerful 0.4 hp pneumatic motor for professional use
- Cuts on the upward stroke for a reduced punch break
- The small diameter cutting head allows the nibbler to start at a distance from the edge of a workpiece by drilling a 9/16" hole.
- The position of the cutting head can be adjusted to allow cutting in four directions: forward, backward, right, or left.
- Nibbler cuts 1.2 mm ordinary steel, 1.6 mm aluminum and 0.8 mm stainless steel
- Compact design for close-up use
- For maximum performance, we recommend an air pressure of 90 psi
- Powerful 0.4 hp pneumatic motor for professional use
- Cuts on the upward stroke for a reduced punch break
- The small diameter cutting head allows the nibbler to start at a distance from the edge of a workpiece by drilling a 9/16" hole.
- The position of the cutting head can be adjusted to allow cutting in four directions: forward, backward, right, or left.
- Nibbler cuts 1.2 mm ordinary steel, 1.6 mm aluminum and 0.8 mm stainless steel
- Compact design for close-up use
JET404153
Prix régulier
$227.58
Preorder today
- For maximum performance, we recommend an air pressure of 90 psi
- Powerful 0.4 hp pneumatic motor for professional use
- Cuts on the upward stroke for a reduced punch break
- The small diameter cutting head allows the nibbler to start at a distance from the edge of a workpiece by drilling a 9/16" hole.
- The position of the cutting head can be adjusted to allow cutting in four directions: forward, backward, right, or left.
- Nibbler cuts 1.2 mm ordinary steel, 1.6 mm aluminum and 0.8 mm stainless steel
- Compact design for close-up use
- For maximum performance, we recommend an air pressure of 90 psi
- Powerful 0.4 hp pneumatic motor for professional use
- Cuts on the upward stroke for a reduced punch break
- The small diameter cutting head allows the nibbler to start at a distance from the edge of a workpiece by drilling a 9/16" hole.
- The position of the cutting head can be adjusted to allow cutting in four directions: forward, backward, right, or left.
- Nibbler cuts 1.2 mm ordinary steel, 1.6 mm aluminum and 0.8 mm stainless steel
- Compact design for close-up use