DEPTH GAUGE 6''-236 - 236
STT51074
Prix régulier
$154.91
- The head is graduated to the left and right at 30, 45 and 60 degrees
- The head is made of hardened steel, ground and well polished - 2-5/8 in (66 mm) long and 1/8 in (3 mm) wide
- The center of the head is recessed so that the tool rests flat, allowing for more accurate measurements.
- A hardened ruler, precision machined into divisions, is smoothly fitted onto the head and can be locked in position by a knurled nut.
- One side of the base is cut out to allow for easier and more precise readings.
- The rule can be defined at 30, 45 and 60 degrees
- The head is graduated to the left and right at 30, 45 and 60 degrees
- The head is made of hardened steel, ground and well polished - 2-5/8 in (66 mm) long and 1/8 in (3 mm) wide
- The center of the head is recessed so that the tool rests flat, allowing for more accurate measurements.
- A hardened ruler, precision machined into divisions, is smoothly fitted onto the head and can be locked in position by a knurled nut.
- One side of the base is cut out to allow for easier and more precise readings.
- The rule can be defined at 30, 45 and 60 degrees
STT51074
Prix régulier
$154.91
- The head is graduated to the left and right at 30, 45 and 60 degrees
- The head is made of hardened steel, ground and well polished - 2-5/8 in (66 mm) long and 1/8 in (3 mm) wide
- The center of the head is recessed so that the tool rests flat, allowing for more accurate measurements.
- A hardened ruler, precision machined into divisions, is smoothly fitted onto the head and can be locked in position by a knurled nut.
- One side of the base is cut out to allow for easier and more precise readings.
- The rule can be defined at 30, 45 and 60 degrees
- The head is graduated to the left and right at 30, 45 and 60 degrees
- The head is made of hardened steel, ground and well polished - 2-5/8 in (66 mm) long and 1/8 in (3 mm) wide
- The center of the head is recessed so that the tool rests flat, allowing for more accurate measurements.
- A hardened ruler, precision machined into divisions, is smoothly fitted onto the head and can be locked in position by a knurled nut.
- One side of the base is cut out to allow for easier and more precise readings.
- The rule can be defined at 30, 45 and 60 degrees