1/4" x 8" Chainsaw File - 02147N
CCNIC02147N
Prix régulier
$2.44
Preorder today
- Works on most common general-purpose pole hardware, such as lag bolts, clamps, and "c" hanger bolts.
- Place the file against the beveled cutting surface of the teeth at a 20 to 45-degree angle with a saw.
- File from the inside outwards on the cutter
- Sharpen all the cutters on the left side of the chain and move to the other side and file all the cutters on the right.
- Sharpen all the left-hand cutters on one side of the chain
- Check the depth gauge height every 2 or 3 sharpenings.
- The height between the cutting teeth and the depth gauge is between 0.02 and 0.03 inches
- Works on most common general-purpose pole hardware, such as lag bolts, clamps, and "c" hanger bolts.
- Place the file against the beveled cutting surface of the teeth at a 20 to 45-degree angle with a saw.
- File from the inside outwards on the cutter
- Sharpen all the cutters on the left side of the chain and move to the other side and file all the cutters on the right.
- Sharpen all the left-hand cutters on one side of the chain
- Check the depth gauge height every 2 or 3 sharpenings.
- The height between the cutting teeth and the depth gauge is between 0.02 and 0.03 inches
CCNIC02147N
Prix régulier
$2.44
Preorder today
- Works on most common general-purpose pole hardware, such as lag bolts, clamps, and "c" hanger bolts.
- Place the file against the beveled cutting surface of the teeth at a 20 to 45-degree angle with a saw.
- File from the inside outwards on the cutter
- Sharpen all the cutters on the left side of the chain and move to the other side and file all the cutters on the right.
- Sharpen all the left-hand cutters on one side of the chain
- Check the depth gauge height every 2 or 3 sharpenings.
- The height between the cutting teeth and the depth gauge is between 0.02 and 0.03 inches
- Works on most common general-purpose pole hardware, such as lag bolts, clamps, and "c" hanger bolts.
- Place the file against the beveled cutting surface of the teeth at a 20 to 45-degree angle with a saw.
- File from the inside outwards on the cutter
- Sharpen all the cutters on the left side of the chain and move to the other side and file all the cutters on the right.
- Sharpen all the left-hand cutters on one side of the chain
- Check the depth gauge height every 2 or 3 sharpenings.
- The height between the cutting teeth and the depth gauge is between 0.02 and 0.03 inches