HAND TAP 10-24 NC INTERMEDIATE H2 - 6006932
BUT1010438
Prix régulier
$41.35
Preorder today
- Designed for use in aluminum, magnesium, and other non-ferrous materials where this type of tap is most commonly used.
- Taps suitable for other materials can be supplied upon request
- The taps are dimensionally oversized and use a larger diameter hole size for tapping so that the thread they produce accepts a helical thread insert of the same size and not nominal
- For a particular size and pitch, the lower limit number h is suggested for class 2b and 3b threads, while the upper limit h is suggested for class 2b.
- through hole or blind hole
- Designed for use in aluminum, magnesium, and other non-ferrous materials where this type of tap is most commonly used.
- Taps suitable for other materials can be supplied upon request
- The taps are dimensionally oversized and use a larger diameter hole size for tapping so that the thread they produce accepts a helical thread insert of the same size and not nominal
- For a particular size and pitch, the lower limit number h is suggested for class 2b and 3b threads, while the upper limit h is suggested for class 2b.
- through hole or blind hole
BUT1010438
Prix régulier
$41.35
Preorder today
- Designed for use in aluminum, magnesium, and other non-ferrous materials where this type of tap is most commonly used.
- Taps suitable for other materials can be supplied upon request
- The taps are dimensionally oversized and use a larger diameter hole size for tapping so that the thread they produce accepts a helical thread insert of the same size and not nominal
- For a particular size and pitch, the lower limit number h is suggested for class 2b and 3b threads, while the upper limit h is suggested for class 2b.
- through hole or blind hole
- Designed for use in aluminum, magnesium, and other non-ferrous materials where this type of tap is most commonly used.
- Taps suitable for other materials can be supplied upon request
- The taps are dimensionally oversized and use a larger diameter hole size for tapping so that the thread they produce accepts a helical thread insert of the same size and not nominal
- For a particular size and pitch, the lower limit number h is suggested for class 2b and 3b threads, while the upper limit h is suggested for class 2b.
- through hole or blind hole